Support Board
Date/Time: Thu, 28 Nov 2024 15:55:30 +0000
Post From: Horizontal Grid/Scale Bands as opposed to lines.
| [2023-04-26 21:46:36] |
| John - SC Support - Posts: 36350 |
|
This is not available by default. You could create this, but it will take a bit of work and a lot of studies. If you just want a few "grids" then it's not too bad. The general idea would be to start with the "Horizontal Lines Study" and put the lines at the levels/spacing you want. Then you would use the "Study Subgraphs Reference" to reference two of the subgraphs from the "Horizontal Lines Study" for which you want to create the "fill" between. By default, the Study Subgraphs Reference is setup to create a fill color between the two subgraphs. You may need to set the scale to "Automatic" for this study, however. Repeat the process of adding the "Study Subgraphs Reference" for each pair of subgraphs for which you want the fill. Refer to the following for the Horizonal Lines study: Horizontal Lines Refer to the following for the Study Subgraphs Reference: Study Subgraphs Reference -- Another option would be to add "Extending Rectangles" for each filled area you want. For the most reliable, advanced, and zero cost futures order routing, use the Teton service: Sierra Chart Teton Futures Order Routing |