Support Board
Date/Time: Sun, 16 Mar 2025 00:00:22 +0000
Post From: Study: High/Low for Time Period - Extended
| [2022-07-21 18:15:21] |
| John - SC Support - Posts: 38678 |
|
In order to do what you want, you need to have a chart that is setup such that one bar starts at the time for which you want to capture the information and another bar ends at the time for which you want to stop the capture. There is not a way to capture intra-bar information. In other words, if you want to capture the High and Low from 09:00 to 09:59, then you need bars that start at 09:00 and end at 09:59. This could be 1 minute, 15 minute, 30 minute, or 1 hour bars. You also need to be careful with the Session Start Time such that it will also give you what you need, depending on your bar timing. For instance, if you have 30 minute bars, then you could have a start time of 08:30, but if you use 1 hour bars, then your Start Time would have to be on the hour, such as 08:00. Refer to the information on Session Times here: Chart Session Times For the most reliable, advanced, and zero cost futures order routing, use the Teton service: Sierra Chart Teton Futures Order Routing |